基本功能：

• 模拟非接触式读卡器测试非接卡

可选功能：

• 模拟非接触式卡测试非接读卡器

应用领域：

• 非接智能卡或读卡器的底层测试(RF和Protocol)
• ISO 14443, NFC, EMV相关卡片/终端的测试和认证

MP300 TCL2的主要特性：

• 相容智能卡，RFID标签，e-Passports，微模组和NFC设备
• 支持ISO 14443, ISO 15693, ISO 18092(NFC-IP1, NFC-IP2), Mifare, FeliCa协议
• 支持NFC-IP1/IP2规范，可以支持所有模式(active, passive mode, in active and target variants)
• 完全执行NFC协议
• 开放的系统来执行客户自订的协议
• 所有参数可以灵活调节（磁场强度，载波频率，调制度…）
• 可以捕捉测试仪和被测目标之间的交互
• 精确的时序测量功能
• 提供Sequencer, 完美的回圈执行测试scenario及进一步的协议测试
• 高级的测量功能（晶片阻抗测量，谐振频率测量，磁场强度测量）
• 可以配合其他软硬件设备进行RF测试
• 可以和MP300 TC3 或SC1同步运行，来测试/分析双介面卡片或NFC设备
• 开放式平台，客户可以将MP300 TCL2集成到自己的测试平台
• 同时提供MP Manager配套软件，客户无需程式设计即可完全控制测试

当面对着最困难的测试环境时，您可以完全信任MP300 TCL2的极高性能.

<<查詢

MP300 TCL2 Specifications

SUPPORTED PROTOCOLS by MP300 TCL2

CONTACTLESS TERMINAL EMULATION (SMARTCARD TESTING) of MP300 TCL2

• ISO/IEC 14443 (proximity cards)
  • Type A
  • Type B
  • Anticollision Supported
  • T=CL protocol Supported
  • Supported data rates:
    • 106, 212, 424, 828 kbps
    • Asymetrical data rates supported
• B' (Innovatron)
• ISO/IEC 15693 (vicinity cards)

•  
  • Supported data rates
    • Low data rate
    • High data rate
  • Tag coding method
    • One sub-carrier
    • Two sub-carriers
  • Encoding modes
    • 1 out of 4
    • 1 out of 256
• ISO 18000-3 Mode 1
• Mifare
  • Types supported
    • Classic
    • Light
    • Ultra Light
    • Ultra Light C
    • Many more
  • Encryption
    • Assisted by hardware
• FeliCa
  • Available data rates
    • 212 and 424 kbps
  • Encryption
    • Available through an external device
• Raw mode
  • Gives the possibility to exchange frames without any protocolary encapsulation
• Out of standard chips
  • Benefit from Micropross' experience in smartcard programming

OPTIONNAL SMARTCARD EMULATION (READER/WRITER TESTING) of MP300 TCL2

• ISO/IEC 14443 (proximity cards)
  • Type A
  • Type B
  • Supported datarates
    • 106, 212, 424, 848 kbps
    • Asymetrical datarates supported
• FeliCa
  • Supported datarates
    • 212 and 424 kbps
• ISO/IEC 15693 (vicinity cards)
  • Emulated types of tags
    • One sub-carrier
    • Two sub-carriers
• NFC Forum
  • Supported communication modes
  • Tag mode (type 1 to 4)
  • Reader/writer mode
  • Peer to peer mode
  • Supported data rates: 106, 212 and 424 kbps
• ISO/IEC 18092 (NFC-IP1, NFC-IP2)
  • Supported communication modes
  • Passive initiator
  • Passive target (optionnal)
  • Active initiator
  • Active target
  • Supported data rates: 106, 212 and 424 kbps

PROGRAMMABLE PARAMETERS of MP300 TCL2

• PHYSICAL PARAMETERS
  • Field strength Adjustable
  • Modulation index: From 0% to 100%
  • Field rise time: 0ms to 5ms
  • Carrier frequency: 12.56MHz to 14.56MHz
  • Modulation rise and fall times: 0μs to 10μs
• LOGICAL PARAMETERS
  • Type A pause width: 0 to 4.4μs
  • Frame waiting time: Adjustable in ETU
  • Type B framing (SOF, EGT, EOF, bit duration): Adjustable in clock cycles
  • TR2 timing: Adjustable with the sequencer
  • Communication speed: 106, 212, 424, 848 kbps

SPY FEATURE of MP300 TCL2

• Resolution: 20ns
• Events displayed
  • Field detection
  • External field detection
  • Carrier and subcarrier detection
  • Type A sequences
  • Phase changes
  • Bytes
  • Frames
  • User events
  • Trigger in
  • Trigger out
  • I/O direction
  • Baudrate changes (asymetrical data rates are supported)

AVAILABLE TESTS of MP300 TCL2

ELECTRICAL TESTING

• Resonance frequency measurement
• Range: 11 to 24 MHz
• Q factor measurement
• Chip impedance: Measurement done at 13.56 MHz
• Magnetic field measurement
  • Measurement range: 0 to 8 A/m
• Generation of EMD (Electro Magnetic Disturbance)

LOGICAL TESTING

• Automatic testing
  • Send type A command, wait, send type B command and receive answer (for type B ards)
  • Send type B command, wait, sent type A command and receive answer (for type A cards)
  • Switch on field, wait, send request command (A or B), receive answer
  • Send request, wait, send request, receive the answer
  • Antitearing
  • PICC reset characterization
  • Check minimum FDT (frame delay time)
• Testing through API manipulation
  • Response time measurement (FDT, TR0, TR1)
  • Sending of out of standard frames
  • Sending misformed blocks (wrong number of bits)
  • Retro modulation ratio measurement
  • Distance simulation checking
  • Separated RX channel allowing communication using a RF amplifier

TRIGGERS

• The MP300 TCL2 offers many triggers, to synchronise or to be synchronised by external laboratory devices (oscilloscopes,...)

PHYSICAL INFORMATION of MP300 TCL2

• Weight (Uniterary rack package): 1.98 kg
• Dimensions (Uniterary rack package)
  • Width : 150mm
  • Height : 78mm
  • Depth : 270mm
• COMMUNICATION PARAMETERS
  • USB 2.0
  • TCP/IP 10/100 Mbps
  • RS 232

SOFTWARE DEVELOPMENT of MP300 TCL2

• Remote development (the code is executed from the PC)
  • Elements available
    • MPSDK .NET library available on demand
    • Communication Dll supplied
  • Supported programming languages
    • C, C++, VB, Java, .NET
    • Any language that supports Dll
• Embedded development (the code is executed directly by the MP300)
  • Recommended cross compiler
    • Windriver compiler (prefered version : 4.4b)

MP300 TCL2 USER INTERFACE

• MPManager

<<查詢